Administration Options 62
Model 3202 User Manual 4 • Web configuration
Administration Options
This section allows you to configure administration options for Security, Simple Network Management Proto-
col (SNMP) and Remote System Log.
Security Administration
For system security, you should change the default user name and password during initial setup. Otherwise,
unauthorized persons can access the Model 3202 and change the parameters. Click Security in the Administra-
tion menu to set up the parameters.
Figure 46. Security Administration page
User Profiles
For better security, change the Supervisor ID and Supervisor Password for the Model 3202. If you don't set
them, all users will be able to access the Model 3202 using the default Supervisor ID and Supervisor Password
,which is root.
You can authorize five legal users to access the Model 3202 via telnet or console only. There are two UI modes,
menu driven mode and command mode to configure the Model 3202. The default user name and Password
are admin. There are two UI modes, the WMI and the Telnet/Console mode to set up the Model 3202.
Figure 47. Model 3202 configuration modes
Telnet Console Mode
Web Browser Mode
User Name
Password
Exit
Supervisor Password
All functions are available
Only available functions:
Ping, View Status, Configuration
Supervisor ID
Supervisor Password
Logout
All functions are available