Filter
Top Products
Administration Command Menu 99
Model 3202 User Manual 5 • Console and Telnet configuration
You can set up the following options:
• Version: Set to Disable, Version 1 or Version 2.
• Trap host IP address: Enter the dtrap host IP address.
• Community: Enter the community password.
Use the list command to view all SNMP trap host entries.
Supervisor Password and ID
The supervisor ID and password is the last option in the security command menu, but it is the most important
menu item. Users who access the Model 3202 via a web browser or console/Telnet must use the supervisor ID
and password to configure the Model 3202. You should change the supervisor ID and password after initial
configuration.
Supervisor Password
To change the supervisor password, move the cursor “ >>” to passwd in the security menu and press Enter.
The default password is root.
----------------------------------------------------------------------
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password: ****
Input new Supervisor password: ********
Re-type Supervisor password: ********
----------------------------------------------------------------------
Supervisor ID
To change the supervisor ID, move the cursor “ >>” to id in the security menu and press Enter.
The default ID is root.
-----------------------------------------------------------------------------
Command: admin id <name>
Message: Please input the following information.
Legal user name (ENTER for default) <root>:
-----------------------------------------------------------------------------
Figure 47 on page 62 shows a flowchart of user access functions using the web browser or console/Telnet.
ID Password
Web Browser
• •
Telnet/Console
•