Filter
Top Products
Administration Options 63
Model 3202 User Manual 4 • Web configuration
Remote Management Hosts
The Remote Management Host section of the Security Administration page enables you to set up the legal IP
addresses from which authorized persons can configure the Model 3202. This is the most secure way for the
network administrator to set up the legal address of configuration.
Figure 48. Remote Management Host section
A configuration of 0.0.0.0 will allow all hosts on Internet or LAN to access the Model 3202. If you leave the
trusted host list completely blank, you will block all PCs on the WAN from accessing the Model 3202. On the
other hand, only PCs in the LAN can access the Model 3202. If you type the exact IP address in the filed, only
that host can access the Model 3202.
Click Finish to commit your changes. The browser will prompt the configured parameters and check it before
writing into NVRAM. Press Restart to reboot the Model 3202 with the new settings. Click Continue to con-
figure other options.
SNMP Administration
Simple Network Management Protocol (SNMP) provides for the exchange of messages between a network
management client and a network management agent for remote management of network nodes. These mes-
sages contain requests to get and set variables that exist in network nodes in order to obtain statistics, set con-
figuration parameters, and monitor network events. SNMP communications can occur over the LAN or WAN
connection.
The Model 3202 can generate SNMP traps to indicate alarm conditions, and it relies on SNMP community
strings to implement SNMP security. This Model 3202 support both MIB I and MIB II.