Filter
Top Products
Administration Command Menu 98
Model 3202 User Manual 5 • Console and Telnet configuration
-----------------------------------------------------------------------------
Command: ... 2 edit <Disable|Enable> <string> <Read_Only|Read_Write|Denied>
Message: Please input the following information.
Validate (TAB Select) <Enable>: Enable
Community (ENTER for default) <private>:
Access right (TAB Select) <Denied>:
-----------------------------------------------------------------------------
You can set up the following options:
• Validate: Set to Enable or Disable.
• Community: Enter the desired password for community access.
• Access right: Set to Read only, Read Write or Denied.
Use the list command to view all SNMP community pool entries. You can also confgiure five SNMP trap
entries.
Trap host
To set up SNMP traps, move the cursor “ >>” to trap in the snmp menu and press Enter. You can configure
five trap entries.
----------------------------------------------------------------------
Command: admin snmp trap <1~5> <more...>
Message: Please input the following information.
Trap host entry number <1~5> : 2
----------------------------------------------------------------------
The following menu displays:
Select edit and press Enter.
-----------------------------------------------------------------------------
Command: admin snmp trap 1 edit <Disable|1|2> <ip> <string>
Message: Please input the following information.
Version (TAB Select) <Disable>:
Trap host IP address (ENTER for default) <192.168.0.254>:
Community (ENTER for default) <private>:
-----------------------------------------------------------------------------
Read_Only Users have read-only access to the community
Read_Write Users have read and write access to the community
Denied There is no access to the community
>>
edit Edit trap host parameter
list Show trap configuration