Filter
Top Products
266 Character string length in the control characters packet
must be 5 (MPCL control characters) or 7 (ENQ/IMD
command character).
267 Baud rate selection must be 0 (1200), 1 (2400), 2
(4800), 3 (9600), 4 (19200), 5 (38400), 6 (57600), or 7
(115200). Resend the communication settings packet.
268 Word length selection must be 0 (7 bits), or 1 (8 bits).
Resend the communication settings packet.
269 Stop bits selection must be 0 (1 bit), or 1 (2 bits).
Resend the communication settings packet.
270 Parity selection must be 0 (none), 1 (odd), or 2 (even).
Resend the communication settings packet.
271 Flow control selection must be 0 (none), 1 (DTR), 2
(CTS/RTS), or 3 (XON/XOFF). Resend the
communication settings packet.
272 Internal code page selection must be 0 (Internal), 1
(ANSI), 2 (DOS 437), 3 (DOS 850), 4 (1250- Latin 2), 5
(1251- Cyrillic), 6 (1252- Latin 1), 7 (1253- Greek), 8
(1254- Turkish), 9 (1255- Hebrew), 10 (1256- Arabic), 11
(1257- Baltic), 12 (1258- Vietnamese), 13 (852- Latin 2),
14 (855- Russian), 15 (857- IBM Turkish), 16 (860- DOS
Portuguese), 17 (Wingdings), 18 (Macintosh), 19
(UNICODE), 20 (BIG5), 21 (GB), 22 (SJIS to SJIS), 23
(GB to GB), 24 (BIG5 to BIG5), or 25 (KSC to KSC).
273 Cut adjustment must be -300 to 300 dots.
282 RS232 Trailer string is too long. Use a maximum of 3
characters.
283 ENQ Trailer string is too long. Use a maximum of 3
characters.
284 The buffer type must be T (Transmit), R (Receive), I
(Image), F (Format), or D (Downloadable Fonts).
Diagnostics and Errors
8-13