Filter
Top Products
622 Not enough memory to create the downloaded TrueType
characters in the scalable (vector) fonts buffer.
Reconfigure the printer’s memory and increase the
scalable fonts buffer. Resend the font, format, and
batch packet after reconfiguring the memory. If the
error message persists, call Technical Support.
Machine Faults
These errors occur when there is a problem with the printer.
703 The printer sensed a calibration of different-sized black
marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches or out of supplies.
Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
Press ENTER or ESCAPE/CLEAR, depending on your
printer. If the error continues to appear, change the
supply.
750 Printhead is overheated. Turn off the printer to let the
printhead cool. If the error persists, call Technical
Support.
751 Printer did not sense a black mark when expected.
For errors 751-753, Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
8-20
Diagnostics and Errors