Filter
Top Products
Job Response
The Job Response varies, depending on the type of request
sent to the printer. The following syntax is the response for a
Job 0, 1,or 2 request.
Syntax {J,Status1,Status2,"FMT-1","BCH-2"}
Status1 These errors stop the print job. Examples
include out of stock, supply faults, or data
formatting errors. These errors are
numbered less than 24 on the "Job Status
0, 1, 2 Response Table," later in this
chapter.
Status2 These are errors in the syntax of the
MPCL data stream. Printing does not
stop, but the information may not print
properly. These errors are numbered
greater than 24 on the "Job Status 0, 1, 2
Response Table," later in this chapter.
FMT-1/BCH-2 The format or batch number is returned.
Here is an example of a response returned to a J 0, 1, 2
request:
{J,8,0,"FMT-1","BCH-2"}
Indicates that a portion of the format extends off the tag in
format 1, batch 2. Refer to the "Job Status 0, 1, 2 Response
Table" later in this chapter for brief explanations for J, 0, 1, 2
requests. In the above example, see error 8 for an
explanation.
MPCLII Packet Reference Manual
7-8