Filter
Top Products
Error
Code
Description
285 The storage device type must be N (non-volatile
RAM) or R (volatile RAM). See "Defining the
Memory Configuration Packet" in Chapter 3 for more
information.
286 The buffer size is invalid. See "Defining the Memory
Configuration Packet" in Chapter 3 for more
information.
287 The printhead width must be 230 to 768 dots.
288 Battery voltage must be 0 (15-volt battery) or 1
(12-volt battery).
289 The printer’s address must be exactly six characters.
310 Check digit scheme number must be 1 to 10 only.
311 Modulus must be 2 to 11 only.
314 Check digit algorithm must be D (sum of digits) or P
(sum of products).
325 Duplicating direction must be 0 (insert after) or 1
(insert before) in duplicate fields for graphics.
327 Amount of row adjustment must be 0 to 999.
328 Duplicate count must be 0 to 999.
340 Bitmap line encoding must be H (hex) or R (run
length).
350 Font number must be 1 to 9999.
351 Font data length must be 68 to 16384.
352 Insufficient font memory is available for the
downloaded font.
MPCLII Packet Reference Manual
9-10