Filter
Top Products
Options for the Scalable Font:
A
Opaque, Normal, Black, Bold
B
Opaque, Normal, Black, Normal
E
Opaque, Italics, Black, Bold
F
Opaque, Italics, Black, Normal
N
Transparent, Normal, Black, Bold
O
Transparent, Normal, Black, Normal
S
Transparent, Italics, Black, Bold
T
Transparent, Italics, Black, Normal
NOTE:
Solid black print cannot exceed 20% (for the
9490 printer) or 30% (for the 9494/9446/1460
printers) on any given square inch of the label.
There are two types of field color overlay attributes:
Transparent The overlay field (text or constant text) does
not block out (or "erase") existing fields.
Opaque The overlay field blocks out (or "erases")
existing fields.
Field placement in the packet is an important
consideration when using field color attributes. If a line
field is defined before the overlay (text or constant text)
field, the line field is blocked out by the overlay field,
depending on the overlay field’s color attribute. If a line
field is defined after the overlay field, the line field is not
blocked out by the overlay field, regardless of the overlay
field’s color attribute.
C9. alignment Alignment of constant text in the field. Options:
L
Align on left side of field.
C
Center text within field
(for monospaced fonts only)
R
Align on right side of field
(for monospaced fonts only)
B
Align at midpoint of field
E
Align at end of field.
Use
L
,
B
, or
E
for any font.
C10. char rot Character rotation. Options:
0
Top of character points to top of field
(Use for scalable font)
1
Top of character points to left of field
2
Top of character points to bottom of field
3
Top of character points to right of field
Chapter 4. Defining Fields
4-17