Filter
Top Products
619 The JIS (16-bit) code for Kanji is invalid.
Machine Faults –––––––––––––––––––––––––––––––––––––––––––––
Errors 700 to 765 occur when there is a problem with the
printer.
Error
Code
Description
700 An error is pending and the printer cannot continue
with the batch. Press the trigger or
E
and try to
continue printing. If the error continues to appear,
call Technical Support.
701 Printer received a command that it cannot execute
while it is running. Press the trigger or
E
and
try to continue printing. If the error reappears, call
Technical Support.
702 SETUP setting is invalid. Check your printer’s
SETUP settings. Press the trigger or
E
and try
to continue printing. If the error reappears, call
Technical Support.
703 The printer sensed a calibration of different-sized
black marks. Make sure the correct supply is loaded.
704 Printer has not sensed a supply mark within the
specified number of inches.
Check the
✦
supply tracking
✦
supply marks
✦
black mark sensor position
✦
supply roll for binding.
Press the trigger or
E
. If the error continues to
appear, change the supply.
Chapter 9. Errors
9-17