Filter
Top Products
T6. column Distance from the left edge of the print area to the pivot
point is the column location. Ranges:
English
0 - 399
Metric
0 - 1015
Dots
0 - 767
T7. gap Number of dots between characters
(192 dots per inch). Range:
0-99
.
NOTE:
For monospaced fonts, the additional spacing is
added to the existing inter-character gap. This is
also true for proportionally spaced fonts, but
remember that the inter-character gap varies with
character combinations.
Any number other than
0
or the default number affects
your field width. Default spacing:
Standard
3 dots
Reduced
1 dot
Bold
3 dots
OCRA-like
3 dots
CG Triumvirate Bold
varies with each letter
CG Triumvirate
varies with each letter
T8. font Style of font. Options:
1
Standard
4
OCRA-like
2
Reduced
10
CG Triumvirate Bold
3
Bold
11
CG Triumvirate
50
CG Triumvirate Bold (scalable)
NOTE:
If you have purchased optional fonts, refer to the
Optional Fonts Manual for valid font selectors.
The scalable font (Font #
50
) must be purchased
separately for the 9446 and 1460 printers. The
scalable font does not print a slashed zero. The
CG Triumvirate fonts and Font #
50
support only
the ANSI and DOS Code 437 and 850 Page
Symbol Sets. See Appendix C, "Symbol
Sets/Code Pages" for more information.
T9. hgt mag Height magnifier,
1-7
(times) or
4-90
points for the
scalable font. If using the scalable font on the 9490
printer, the range is
4-200
points. Use a magnifier of
1
with proportionally spaced fonts, because characters lose
smoothness at higher magnifications.
MPCLII Packet Reference Manual
4-4