Filter
Top Products
L7. thickness Using the chart below for reference, write the desired line
thickness (
1
to
99
) in box
L7
. Measured in dots.
NOTE:
Line thickness fills upward on horizontal lines, or
to the right on vertical lines.
L8. "pattern" Line pattern. Only one pattern is supported on these
printers. Enter
""
.
Example L,S,110,30,110,150,10,"" p
Defines a horizontal line field as a segment starting at row
110, column 30 and ending at row 110, column 150. The line
thickness is 10 dots.
Defining Box Fields––––––––––––––––––––––––––––––––––––––––––
Use boxes to form borders or highlight items of interest.
Define each box field separately. This field is not assigned a
field number, but is counted as a field (keep this in mind, as
the printer allows a maximum of
100
fields per format). You
can define any line length and a thickness up to 99 dots, as
long as the solid black print does not exceed 20 percent (for
the 9490 printer) or 30 percent (for the 9494/9446/1460
printers) of any given square inch of the label.
Chapter 4. Defining Fields
4-21