Filter
Top Products
C3. column Distance to lower left corner of field, from left edge of
print area. Ranges:
English
0 - 399
Metric
0 - 1015
Dots
0 - 767
C4. gap Number of dots between characters. Range:
0-99
.
C5. font Style of font. Options:
1
Standard
4
OCRA-like
2
Reduced
10
CG Triumvirate Bold
3
Bold
11
CG Triumvirate
50
CG Triumvirate Bold (scalable)
NOTE:
If you have purchased optional fonts, refer to the
Optional Fonts manual for valid selectors. The
scalable font (Font #
50
) must be purchased
separately for the 9446 and 1460 printers. The
CG Triumvirate fonts and Font #
50
support only
the ANSI and DOS Code 437 and 850 Page
Symbol Sets. See Appendix C, "Symbol
Sets/Code Pages" for more information.
C6. hgt mag Height magnifier,
1-7
(times) or
4-90
points for the
scalable font. If using the scalable font on the 9490
printer, the range is
4-200
points. Use a magnifier of
1
with proportionally spaced fonts, because characters lose
smoothness at higher magnifications for all fonts.
C7. wid mag Width magnifier,
1-7
(times) or
4-90
points for the scalable
font. If using the scalable font on the 9490 printer, the
range is
4-200
points.
NOTE:
You may need to reconfigure the printer’s
memory to accommodate large point sizes. See
"Defining the Memory Configuration Packet" in
Chapter 3 for more information.
C8. color Options for Standard Printer Fonts:
B
Opaque, Normal, Black, Normal
D
Opaque, Normal, White, Normal
O
Transparent, Normal, Black, Normal
R
Transparent, Normal, White, Normal
W
Opaque, Normal, White, Normal
MPCLII Packet Reference Manual
4-16