Filter
Top Products
On-Screen Display (OSD) menu22
English
Searching and storing channels
1. Make sure that the antenna cable has been connected to the tuner box.
2. Press 目錄 (Menu) on the remote control to display the OSD menu on-
screen.
3. Press or to select TV SETTING and then press or to select
Start.
4. Press OK. The display will start searching for available channels and store
them in the memory. This may take several minutes, depending on the
available channels in your area. To stop the process, press OK.
5. When the process is complete, the scanning will stop and display the
image.
Setting up favorite channels
1. Press 喜愛頻道 (Favorite) on the remote control to display the Favorite
Channels list on-screen.
2. Press or to select an item (CH 1, CH 2... CH 5), then press the
Channel selection buttons on the remote control to enter the channel
number that you desire.
3. Repeat step 2 above if you want to set up more favorite channels.
4. Press 喜愛頻道 (Favorite) to close the menu and save your setting.
TV SETTING menu
The available menu items are
dependent on the input source
being selected.
The illustration is for reference only.
Item Function
TV/CATV
Selects aerial or cable system mode.
Channel +/-
Add weak or additional channels or delete unwanted channels
from display memory.
Start
Searches through all available channels and add them to memory.
See "Searching and storing channels" below.
TV/CATV CATV
Channel +/- Added
Start OK: Start auto installation
Left/Right: Select main page.
OK/Down: Enter sub menu.
PICTURE
PICTURE AD. AUDIO
PREFERENCE
TV SETTING
32PF1700T_96_Tuner-RC-EN.book Page 22 Thursday, April 26, 2007 5:35 PM