Filter
Top Products
Installing the tuner box 3
English
6. Use the supplied screw and a suitable
screwdriver to secure the tuner box on the
display.
7. There are two connectors on the tuner box:
one for aerial antenna input and the other for
loop-through output of signals to other
devices.
Connect the aerial antenna (to be purchased
separately) cable to the aerial antenna input
connector. If necessary, you can also connect
other devices to the loop-through output
connector.
Next, please follow the instructions of
"Scanning and storing channels and radio
stations" on page 4 to scan and store channels
and radio stations available in your area.
Aerial antenna
input
Loop-through
output to
other devices
32PF1700T_96_DTV-EN.book Page 3 Thursday, April 26, 2007 5:05 PM