Philips LPF 5120 Fax Machine User Manual


 
58 Philips · Laserfax 5120 · 5125 · 5135
EN
12 Glossary
Asymmetric Digital Subscriber Line (ADSL).
See Digital Subscriber Line (DSL)
Broadcasting
see Sending to Multiple Recipients
call hold
See Call Toggling
Call Toggling
You can switch back and forth between different telephone
conversations by using the R key. The inactive telephone
conversation is maintained in the interim, and the other
party cannot listen in. This additional service must be ena-
bled for your telephone line (see Call Waiting, see Flash
Key).
Call Waiting
If another caller places a call to you while you are having a
telephone conversation, you will hear a tone. If additional
services are enabled for your telephone connection, you
can toggle back and forth between different telephone calls
(see Flash Key; see Call Toggling).
Call-by-Call
Selection of the telephone service provider for each tele-
phone call. It is possible to place telephone calls through
different private service providers. By placing prefixes in
front of the actual telephone number, one can choose a dif-
ferent service provider for each telephone call without
entering into a firm contract relationship.
Caller List
The numbers of the last callers are stored in the caller list.
This function requires that the caller identification func-
tion be enabled for your PTT line and that the caller not
suppress the transmission of his or her telephone number
(see Calling Line Identification).
Calling Line Identification (CLIP)
There are two types of Calling Line Identification Presen-
tation (CLIP). If someone calls you, your device will show
the caller’s telephone number on the display. If another
caller places a call to you while you are having a telephone
conversation, you will hear a tone. Your telephone com-
pany must offer both services and must enable them for
your PTT line. The transmission of your telephone
number can be turned on and off temporarily or it can be
turned off permanently (Calling Line Identification
Restriction, CLIR).
CCITT
Comite Consultatif International Téléphonique et Télé-
graphique (predecessor of ITU)
CE
Conformité Européenne
Chain Dialling
see Combining Numbers
Chain Dialling
Before the dialling process begins, you can freely combine
and edit telephone book entries, manually entered digits,
numbers from the redial list or numbers from the caller list.
For example, if you have saved the telephone number pre-
fix of an inexpensive telephone service-provider (see Call-
by-Call) as a telephone book entry, select this entry and
manually enter the desired telephone number or select
another number from the telephone book, the redial list or
the caller list.
CLIP
Calling Line Identification Presentation (see Calling Line
Identification)
CLIR
Calling Line Identification Restriction (see Calling Line
Identification)
CNG
Calling Signal (see Fax Signal)
Dialling Pause
Long-distance numbers or telephone numbers with sub-
addresses/extensions sometimes require the insertion of a
dialling pause to prevent the dialling from occurring too
quickly and resulting in a loss of the connection. The sec-
ond part of the number is dialled only after a short pause.
Digital Subscriber Line (DSL)
Data connection for private households or companies with
high transmission speeds (broadband connection) usually
for connection to the Internet. Fixed network telephone
lines can be used for the DSL connection. Due to the fre-
quency range used, Internet use via DSL can be used
simultaneously with the telephone connection. For private
households, there are usually connections with different
transmission speeds: Asymmetric Digital Subscriber Line
(ADSL). A high download rate alongside a far lower
upload speed.
Direct-Dial Number
Number used to directly dial a specific extension of a pri-
vate branch exchange.
DTMF
Dual Tone Multi Frequency (see Tone Dialling)
Dual Tone Multi-Frequency (DTMF)
see Tone Dialling
Easylink
The Easylink function offers you additional options for
managing external devices that are connected to the same
telephone line as your device (starting fax reception, taking
over the line, see Additional Devices). To use this function,
additional telephones must be set to tone dialling (DTMF
tones).
ECM
Error Correction Mode
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 58 Mittwoch, 16. Dezember 2009 10:01 10