Filter
Top Products
Telephone Lines and Additional Devices 27
EN
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing *5 on the additional tele-
phone or pressing START on the device.
Taking Over the Line
If you pick up on an additional telephone and the machine
continues to ring or attempts to receive a fax, you can dis-
connect the machine from the line. Press ** on the
additional telephone.
Changing Code
Easylink Codes
1 Press OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with OK.
Using an External Answering Machine
For the best operation, the answering machine must be
connected to the EXT socket of the device. The numbers
of rings set for the external answering machine should be
less than the one set under
FAX RINGS by at least two.
Example of the setting:
Number of Rings of the External Answering Machine...1
FAX RINGS .............................................................. 3
(also see Chapter Setting the Fax Switch, page 24)
External Answering Machine
If the external answering machine has a “conserving func-
tion” (i.e. a function that changes the number of rings as
soon as new messages have been recorded), deactivate this
function.
If the external answering machine records fax signals, but
your device cannot receive faxes, inspect the connection of
the external answering machine
Only change the codes if it is absolutely necessary.
The codes must begin with * or # and must be
different.
The outgoing message should be shorter than ten
seconds. Avoid music in the outgoing message.