Pitney Bowes B702 Postal Equipment User Manual


 
1-4 SV60941 Rev. B
1 • Introduction
Don't like reading
manuals? Try the
Quick Reference
Guide supplied with
your meter. It's lo-
cated in the ribbon
compartment just
above the cassette.
It contains condensed
instructions for most of the topics covered in this book.
The Quick
Reference Guide
Equipment
Size: 11.75"L x 9.75"W x 7"H in. (30 cm x 25 cm x 18 cm)
Weight: 17.6 lbs. (8 kg), approximate
Power Requirements: 120 VAC, 60 Hz, 3A
Operating Temperature: 40°F (4°C) to 109°F (43°C)
Average Throughput: 30 envelopes per minute maximum.
Actual throughput will vary, depending on the material used
and the skill of the operator.
Ribbon Life: 1,200 impressions maximum; this will vary, de-
pending on the number of ads printed.
Material
Minimum Size: 3" x 3" (76 mm x 76 mm)
Maximum Size: 10" x 13.5" (250 x 340 mm)
Minimum Thickness: 0.007" (0.2 mm)
Maximum Thickness: .24 in. (6 mm)
IMPORTANT! For best results, make sure that your material
(envelopes, postcards) conforms fully to these specifi cations. We
do not recommend textured or rough-surfaced papers because
they may cause poor print quality. Mail that presents an uneven
surface to the print mechanism may also cause poor print qual-
ity. (Tapping mail contents to the top right envelope corner may
help.) Use tape sheets to apply postage to rough surfaced or
oversize mailpieces.
Specifications