Filter
Top Products
4-24 SV60941 Rev. B
Menu 26:
Set Time of
Date Change
This menu choice lets you change the time at which the me-
ter advances the date. This is usually set to occur at 12:00
A.M.
1. The meter prompts “Set Time of Date Change.”
2. Press Yes.
3. The meter prompts "Now 12:00a Press Enter.” (This is
the current setting.)
4. Press Enter.
5. The meter prompts “Enter Hour.”
6. Type in the hour you want using the number keys on
the keyboard. You can type an hour from 1 to 12. Press
Enter. If you enter an invalid number, the meter will dis-
play “Error” and return to the “Set Time of Day” prompt.
If you make a mistake while entering a number, press C
to clear it. The meter prompts “—.” Enter the value you
want.
7. The meter prompts “Enter Min.”
8. Type in the minutes you want. You can type numbers
ranging from 00 to 59. Press Enter. If you enter an in-
valid number, the meter will display “Error” and return to
the “Set Time of Day” prompt.
9. Meter prompts “AM?”
10. Press Yes for AM; No for PM.
11. Meter prompts “Now XX:XXa(p) Press Enter” again
where XX:XXa(p) is the new time for the date change. If
the setting is OK, press Enter. The meter will automati-
cally go to the next item on the setup menu.
4 • Setting Up the Meter