Filter
Top Products
3-5SV60941 Rev. B
Selecting an
Inscription
(B700 Only)
1. Press the Inscription key to see the name of the current
inscription. If the display shows “NONE,” no inscription is
selected.
2. To change the inscription, press the Inscription key
repeatedly until you see the name of the inscription you
want. Press Enter to accept the inscription. The display
then returns to the postage amount.
Shortcut: When the meter is in the inscription mode you
can choose an inscription by pressing its number on the
keypad and pressing Enter. If you enter a wrong number,
the meter displays “No Inscript.”
Press C (Clear) at any time to return to the default post-
age display without changing the inscription or to clear
an error.
Selecting an
Account
(B700 Only)
HINT: Inscriptions are
optional. If no inscrip-
tions are enabled, the
meter will prompt “No
Inscrpts” when you
press the Inscription
key.
HINT: Departmen-
tal accounting is an
optional feature. If your
meter is not equipped
with it, the display
prompts “Accounting
Disabled” when you
press the Account key.
1. Press Account to display the name of the current ac-
count.
2. If you want to change the account to which postage is
charged, press the Account key repeatedly until you
see the account name you want. Press Enter to accept
the account. The display will return to the default post-
age amount and show the account ID number. (If the
account is password protected, the meter prompts you to
enter a password. Type in the password—up to four dig-
its—and press Enter.)
Shortcut: When the meter is in the account mode (that is,
displaying an account), you can choose an account by
pressing its number on the keypad and pressing Enter.
If you select a number the meter doesn’t recognize, the
meter displays the message “No Accnt.”
Press $ Avail then Enter at any time during the process
to go back to the default postage display without chang-
ing the account.
Using the Meter • 3