Filter
Top Products
7-5SV60941 Rev. B
Error and Warning Messages
No Ribbon
The ribbon is exhausted, broken or no ribbon cassette is loaded. Replace the ribbon cas-
sette (Chapter 6), close the cassette door and press Enter.
Please Wait
Printhead temperature is out of range. Wait until it warms up.
Press Enter to Restart
Press Enter to restart the meter.
Remove Mail
The mailpiece did not complete its path through the print area. Carefully remove the mail-
piece from the transport and reinsert it.
Ribbon Out
The ribbon supply is critically low; you must press Enter after each mailpiece is processed.
Replace the ribbon cassette immediately (Chapter 6).
No Ad
The selected slogan is not available. See Chapter 8 for instructions on loading ad slogan
cartridges.
Value Error
You entered an "illegal" value, that is, a value the meter can't accept.
Troubleshooting • 7