Pitney Bowes B702 Postal Equipment User Manual


 
1-7SV60941 Rev. B
Introduction • 1
Refill The process of adding postage funds to
your meter using the Pitney Bowes Post-
age By Phone
®
Service. Sometimes called
“resetting” the meter.
Setup The process of customizing the meter to
best suit your own needs.
Timeout A period of time, measured from the last
key press or meter trip, after which the me-
ter automatically returns to its default set-
tings. You can set timeout length when you
set the meter up.
Trip The process of dispensing and account-
ing for postage. The meter is said to “trip”
when it senses the envelope and starts
printing.
Please follow these common-sense precautions whenever
you use your meter:
Plug the meter into a properly grounded wall outlet. This
reduces the risk of shock and equipment damage in
the event of a short circuit. DO NOT remove the power
cord's ground pin and DO NOT use a ground adapter.
The power cord wall plug is the primary means of dis-
connecting the meter from the AC supply. The meter is
on whenever it is plugged into a live receptacle, even
though the key switch and operator display may be off.
Place the meter close to an easily accessible wall outlet.
Avoid using wall outlets controlled by wall switches or
shared by other equipment.
Make sure the area in front of the wall outlet into which
the meter is plugged is free from obstruction.
DO NOT route the power cord over sharp edges or trap it
between pieces of furniture. Make sure there is no strain
on the power cord.
Safety Notes