Filter
Top Products
3.1.3 Power-up Self-test Status
As the Switch powers on, it goes through a self-test process to ensure proper operations of the Switch hard-ware. The
messages will be displayed to show the test progress. When the test completes successfully, the system will display a login
screen. If any of the components fails during the test, you may need to contact your local dealer and have the Switch
replaced. Figure 3-2 shows a successful Self-test menu of the Power-up System Self-diagnostic Process.
Figure 3-2 Power-up System Self-diagnostic screen
3.1.4 Login
After the self-test completes successfully, the screen in figure 3-3 appears. Login is required to access the console interface.
The factory default username is "admin" without password. You may change it in the Misc Configuration. To access to the
Main Menu, please always enter the correct username and password.
Figure 3-3 Switch Console Login screen
3.2 Getting Started
3.2.1 General Guidelines
Switch allows users to configure the device via menu screens.
To work within the menu, please follow the guidelines shown in Table 3-1.