Planet Technology FGSW-2612PVS Switch User Manual


 
Support full 48VDC power for any remote IEEE802.3af powered device (PD) like Wireless LAN Access Point, IP
phone, and LAN Camera.
Supporting power supply of 260 watts that provides sufficient power to the 24 remote devices.
Each Switching ports support full 48VDC power over unused twisted-pair wires to IEEE802.3af Powered Device.
2 open slots for 10/100Base-TX, 1000Base-T and 100Base-FX, 1000Base-SX/LX fiber-optic interface with various
connection media and distances (FGSW-2402PVS only)
2 10/100/1000Mbps ports and 2 SFP interfaces (FGSW-2620PVS and FGSW-2612PVS)
Auto-MDI/MDI-X detection on each RJ-45 port
Prevents packet loss with back pressure (half-duplex) and 802.3x PAUSE frame flow control (full-duplex)
High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates
erroneous packets to optimize the network bandwidth
6K MAC address table, automatic source address learning and ageing
4 Mbit embedded memory for packet buffers
Console and Web interface for Switch basic management and setup
Support up to 26 port-based VLAN groups
Support up to 7 Trunk groups, each trunk for up to maximum 4 port with 800Mbps bandwidth
Port mirroring allows monitoring of the traffic across any port in real time
Support QoS and bandwidth control on each port
Misc Configuration for Switch advanced configuration
1.4 Product Specifications
Model FGSW-2402PVS FGSW-2620PVS FGSW-2612PVS
Hardware Specification
Network Port 24 10/100Base-TX RJ-45 MDI/MDI-X ports
Module Slot 2 open slots for 10/100Base-
TX, 1000Base-T and
100Base-FX, 1000Base-SX
/LX fiber-optic interface
N/A; Fixed interfaces N/A; Fixed interfaces
Gigabit Port
2; interface vary on module
installed
2 10/100/1000Mbps TP ports and 2 SFP interfaces (shared)
POE Port 24 (port #1 to #24) 12 (port#1 to #12)
Console Port 1 RS-232 DB-9 male
Dimension 440 x 200 x 44 mm (1U height)
Weight 2.6 kg
Power Requirement 100~240 (±10%) VAC, 50-60 (±3) Hz
System Power
Consumption
30 Watts maximum; 102 BTU / hr maximum
Switch Specification
Switch Architecture Store-and-forward
Address Table 6K entries, auto learning/ageing
Shared Data Buffer 4 Mbit embedded memory for packet buffers