Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
108
4.3.3.5 SNMPv3 Groups
A SNMPv3 group sets the access policy for its assigned users, restricting them to specific read, write, and notify views. You can
use the pre-defined default groups or create new groups to map a set of SNMP users to SNMP views.
Figure 4-3-11 SNMPv3 Groups page screenshot
1. Click SNMP, SNMPv3, Groups.
2. Click New to configure a new group.
3. In the New Group page, define a name, assign a security model and level, and then select read and write views.
4. Click Add to save the new group and return to the Groups list.
5. To delete a group, check the box next to the group name, then click Delete.
The page includes the following fields:
Object Description
• Group Name
The name of the SNMP group to which the user is assigned.
(Range: 1-32 characters)
• Model
The user security model; SNMP v1, v2c or v3.
The security level used for the user:
-noAuthNoPriv
There is no authentication or encryption used in SNMP
communications. (This is the default for SNMPv3.)
-AuthNoPriv
SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
• Level
-AuthPriv
SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
• Read View
The configured view for read access.
(Range: 1-64 characters)
• Write View
The configured view for write access.
(Range: 1-64 characters)