Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
27
- IP TCP/UDP port number
■ Supports for strict priority and Weighted Round Robin (WRR) CoS policies
■ Supports QoS and bandwidth control on each port
■ Traffic-policing policies on the switch port
Multicast
■ Supports IGMP Snooping v1 and v2
■ Querier mode support
■ Multicast VLAN Registration (MVR)
Security
■ IEEE 802.1x Port-Based / MAC-Based Authentication
■ Web Authentication
■ RADIUS / TACACS+ users access authentication
■ IP-Based Access Control List (ACL)
■ MAC-Based Access Control List (ACL)
■ Port Security
Management
■ Switch Management Interface
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH v1/v2 switch management
- SSL v3/TLS v1 switch management
■ IP Stacking management up to 36 units
■ Accesses through SNMPv1, v2c and v3 security set and get requests.
■ Four groups (history, statistics, alarms and events) of embedded remote monitoring (RMON) agents for network
monitoring and traffic analysis
■ Built-in Trivial File Transfer Protocol (TFTP) client
Power over Ethernet (SGSD-1022P / SGSW-2840P Only)
■ Complies with IEEE 802.3af Power over Ethernet End-Span PSE
■ Up to 8 / 24 IEEE 802.3af devices powered
■ Support PoE Power up to 15.4 watts for each PoE ports
■ Auto detect powered device (PD)
■ Circuit protection prevent power interference between ports
■ Remote power feeding up to 100m
■ PoE Management
■ Total PoE power budget control
■ Pert port PoE function enable/disable
■ PoE Port Power feeding priority
■ Per PoE port power limit
■ PD classification detection