Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
110
coldStart 1.3.6.1.6.3.1.1.5.1 A coldStart trap signifies that the SNMPv2 entity, acting
in an agent role, is reinitializing itself and that its
configuration may have been altered.
warmStart 1.3.6.1.6.3.1.1.5.2 A warmStart trap signifies that the SNMPv2 entity, acting
in an agent role, is reinitializingitself such that its
configuration is unaltered.
linkDown* 1.3.6.1.6.3.1.1.5.3 A linkDown trap signifies that the SNMP entity,acting in
an agent role, has detected that the ifOperStatus object
for one of its communication links is about to enter the
down state from some other state (but not from
thenotPresent state). This other state is indicated by the
included value of ifOperStatus.
linkUp* 1.3.6.1.6.3.1.1.5.4 A linkUp trap signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus object for
one of its communication links left the down state and
transitioned into some other state (but not into the
notPresent state). This other state is indicated by the
included value of ifOperStatus.
authenticationFailure* 1.3.6.1.6.3.1.1.5.5 An authenticationFailure trap signifies that the SNMPv2
entity, acting in an agent role, has received a protocol
message that is not properly authenticated. While all
implementations of the SNMPv2 must becapable of
generating this trap, the snmpEnableAuthenTraps
object indicates whether this trap will be generated.
RMON Events (V2)
risingAlarm 1.3.6.1.2.1.16.0.1 The SNMP trap that is generated when an alarm entry
crosses its rising threshold and generates an event that
is configured for sending SNMP traps.
fallingAlarm 1.3.6.1.2.1.16.0.2 The SNMP trap that is generated when an alarm entry
crosses its falling threshold and generates an event that
is configured for sending SNMP traps.
Private Traps
swPowerStatus
ChangeTrap
1.3.6.1.4.1.259.6.10.103.2
.1.0.1
This trap is sent when the power state changes.
swIpFilterRejectTrap 1.3.6.1.4.1.259.6.10.103.2
.1.0.40
This trap is sent when an incorrect IP address isrejected
by the IP Filter.
Table 4-3-1 Supported Notification Messages