Filter
Top Products
User’s Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
219
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
4. For multicast streams that will run for a long term and be associated with a stable set of hosts, you can statically bind the
multicast group to the participating interfaces (see “Assigning Static Multicast Groups to Interfaces”).
4.9.3.1 MVR Configuration
Configuring Global MVR Settings
The global settings for Multicast VLAN Registration (MVR) include enabling or disabling MVR for the Managed Switch, selecting
the VLAN that will serve as the sole channel for common multicast streams supported by the service provider, and assigning the
multicast group address for each of these services to the MVR VLAN.
Figure 4-9-11 MVR Configuration page screenshot
The page includes the following fields:
Object Description
• MVR Status
When MVR is enabled on the switch, any multicast data associated with an MVR
group is sent from all designated source ports, and to all receiver ports that have
registered to receive data from that multicast group.
(Default: Disabled)
• MVR Running Status
Indicates whether or not all necessary conditions in the MVR environment are