Filter
Top Products
Printek Emulation
97
Escape Sequence: ESC \ ESC
Hexadecimal: 1B 5C 1B
Line Pitch
Set Line Spacing to n/288” ESC LF n
Sets the line spacing to n/288 of an inch per line. 0≥n≥255. Overrides the “Lines/Inch” value in the forms
menu.
Example: The following escape sequence will set line spacing to 1/6 of an inch per line (6 lpi).
Escape Sequence: ESC LF 48
Hexadecimal: 1B 0A 30
Horizontal Position
Carriage Return CR
Causes the current line to be printed, and then sets the current print position to the left margin. If “Auto LF”
is set to “On” in the interface setup menu, a line feed will also be performed.
Control code: CR
Hexadecimal: 0D
Backspace BS
Causes the current line to be printed, and then moves the current print position one space to the left. The
actual distance moved depends on the current character spacing. Backspacing can be done up to, but not
beyond, the left margin.
Control code: BS
Hexadecimal: 08
Vertical Position
Line Feed LF
Causes the current line to be printed, and then advances the paper one line at the current line spacing. If
“Auto CR” is set to “On” in the interface setup menu, a carriage return will also be performed.
Control code: LF
Hexadecimal: 0A