Filter
Top Products
ANSI X3.64 Emulation
21
Control Codes and Escape Sequences
Grouped by Function
Communications
Cancel Line CAN
Cancels all printable text in the current print line. Does not affect any control codes or escape sequences.
Control code: CAN
Hexadecimal: 18
Delete Character DEL
Deletes the last printable character from the current line. Does not affect any control codes or escape
sequences.
Control code: DEL
Hexadecimal: 7F
End of Text ETX
If “ETX/ACK” is set to “On” in the serial interface setup menu, then receipt of an ETX causes the printer to
transmit an ACK to the host computer.
Since the ETX may be a legal value within an escape sequence, it is the user's responsibility to ensure that an
ETX used for data handshake is not sent within an escape sequence. The user must also ensure that the
maximum block size or the number of blocks sent at one time does not exceed the input buffer size of the
printer.
ETX/ACK handshake is available only with serial I/O.
If the printing of low symbols is enabled, ETX will be treated as a printable character instead of an I/O
handshake control code.
Control code: ETX
Hexadecimal: 03