Filter
Top Products
Printing Basic Bar Codes
141
The following sequence will print the same bar code, except the bar code will be four times as wide.
^BN9a448812345^G^-
Example:
Note that when choosing the bar code type off which the variable width bar code will be based, ratio is
irrelevant. If a 2-of-5 bar code with ratio 3:3:9:9 (not supported directly) is desired, it may be derived from
bar code types “g” and “h”. The following variable width bar code definitions all produce exactly the same
result.
^BN9g339912345^G^-
^BN9h339912345^G^-
Choosing any other bar code type will not achieve the desired result. The following bar code has the desired
ratio, but it is a Code 39 instead of a 2-of-5 bar code.
^BN9a339912345^G^-
Bar Code Height
The sequence used to specify bar code height is
^Htt
^H Two Character Sequence Identifier for
Bar Code Height.
tt Height, in Tenth Inches.
Range is 01 to 99 (0.1 to 9.9 inches).
If this sequence is not used, default bar code height is 0.3 inches. All bar codes printed together horizontally
across the page must be the same height. If height is specified more than once, the latest specified height will
be used.