Filter
Top Products
Precharger and Transfer/Separator Charger
109
12. Loosen the precharger thumbscrew, and transfer/separator
charger thumbscrew, and pull the chargers out of the printer.
Legend:
1) Transfer/Separator Charger
2) Thumbscrews
3) Precharger
13. Place the chargers on a flat, clean work surface.
14. Using the brush cleaner and the wire cleaner (listed on page
78), remove the dust and dirt on the wires. When dirt is caked
on, the wires feel gritty. When clean, the wires feel smooth.
15. Install the chargers. Fasten the charger screws to secure them.
3
1
2
2