Filter
Top Products
Photoreceptor Drum
125
15. If the drum has toner build-up, clean it with the drum freshener
pad (listed on page 78). Turn the drum little by little while
polishing the drum surface with the freshener pad. Polish with a
slight force in the direction of the drum axis, using a circular
motion. Let the polished areas slightly overlap each other, and
polish the entire drum surface two or three times.
CAUTION
Press lightly when polishing the drum surface, as too much
pressure can damage the drum.
16. Using the special dry tissue paper (listed on page 78),
thoroughly wipe the drum freshener off the drum surface.
17. Wipe the drum surface again using a Toraysee cloth (listed on
page 78).
18. To avoid exposing the drum to light too long, temporarily pack
the drum in its original packaging material, and close the box
cover. Set the drum aside for now.
19. Remove the drum auxiliary rod from the drum shaft.
20. Wipe the drum shaft clean with a cloth.