Chapter 2 Loading Paper
30
7. Move the right tractor to the left or right until its pins line up with
the holes in the right edge of the paper, then close the right
tractor gate.
NOTE: When you place the paper on the tractors, you should
introduce a slight amount of side-to-side tension into the
paper. The right tractor must be set far enough to the right
so that there are no wrinkles, looseness, etc. in the paper.
Be careful not to set the right tractor too far to the right,
however, as too much tension may cause the paper holes
to tear away from the tractor pins.
8. Lock the right tractor with the tractor lock.
9. If you are reloading paper following a “FAN-FOLD PAPER
EMPTY” message with the printer power on, press ONLINE to
place the printer online. The printer automatically sets the
physical top of form at the leading edge of the paper and
resumes printing.
Legend:
1) Tractor Pins
2) Tractor Gate
3) Tractor Lock
2
1
3