Filter
Top Products
Cut Sheet Tray Linking (Optional Procedure)
35
When the plastic inserts in the cassette contact the paper size
sensors on the printer, the printer determines that the paper
cassette is in position and identifies the paper size.
The following table lists the available standard settings for the cut
sheet paper feed cassette (O = plastic insert; --- = no insert):
Cut Sheet Tray Linking (Optional Procedure)
If your printer is equipped with the cut sheet paper feed option, you
can use Tray Linking. Tray Linking is disabled by default. With Tray
Linking enabled, when the active cut sheet paper tray runs out of
paper, the printer will automatically switch to the other paper tray
and continue printing.
To enable or disable this feature, see the Tray Linking option on the
Paper Control menu. Refer to the
User’s Manual
for details.
NOTE: We recommend that you disable Tray Linking if the two cut
sheet paper trays are of different sizes.
Paper size IPS 12/22 IPS 11/21 IPS 10/20
Legal --- O O
Ledger O O ---
A3 O --- O
B4 O --- ---
Letter --- O ---
A4 --- --- O
Custom Size
(variable width - 7.0 - 12.0 inches)
(variable length - 8.3 - 19.6 inches)
OO O