Filter
Top Products
Chapter 3 Consumables Replacement
66
15. Carefully pull the old drum out along the drum auxiliary rod.
Hold the ends when the drum is nearly out of the printer, and
remove it with both hands.
Legend:
1) Drum
16. Pack the old drum for shipment using the original packaging
material, and close the cover of the box.
17. Wipe the drum shaft clean with a cloth.
CAUTION
Avoid touching the surface of the drum with your hands; it
reduces the life of the drum.
18. Remove the new photoreceptor drum from its package. Do not
discard the packaging material, as it will be needed for future
drum disposal.
NOTE: The ends of the drum are identical; there are no front or
back ends. Wipe inside the endcaps of the drum with a
cloth to ensure that they are clean.
1