Filter
Top Products
Chapter 3 Consumables Replacement
62
7. With your other hand, grasp the hanger and remove the
developing unit from the printer.
8. Vacuum any spilled toner.
CAUTION
The transfer charger must be in the down position to avoid
scratching the drum.
9. Check that the transfer charger is in the down position. Move it
to the down position by rotating the transfer elevator drive shaft
counterclockwise. Watch the charger movement:
a. If the charger starts to move up, it is already in the down
position.
b. If the charger starts to move down, continue to rotate the
drive shaft until the charger reaches the complete down
position.
Legend:
1) Transfer Charger
2) Transfer Elevator Drive Shaft
1
2