Filter
Top Products
139
Public Space Parameters
The DNS and IP Address tables can hold up to 50 entries each. The AAA port option supports only passthrough port.
• Passthrough DNS Table
• Passthrough IP Table
• Passthrough AAA Port
Figure 5-24 IP/DNS Passthrough Table
Passthrough DNS Table
1. Login to the AP’s Web browser interface.
2. Click PublicSpace > Passthrough > IP/DNS.
3. Place a check mark in the Enable Passthrough Address box.
4. Click the Add button below the Passthrough DNS Table heading.
5. Enter the DNS name to filter in the DNS Name field and click OK.
• Enter “www.myhotspot.com” to allow access to a specific web address.
• Enter “*.myhotspot.com” to allow access to all sites associated with the specified DNS name.
• Do not include port, protocol, or path information when enter DNS names.
6. Enter a second DNS name (if applicable) and click OK. Continue until you have entered all of the names you want
to add to the table.
7. Click the back arrow button to return to the previous screen.
8. Reboot the AP.
If you later want to edit or delete an entry, click the Edit button.
• To delete an entry, change the Status to Destroy.
• Only Active and Destroy are valid options within the Status field when using the Web browser interface.