Filter
Top Products
205
Using the Command Line Interface
Parameter Tables
Objects contain groups that contain both parameters and parameter tables.
Use the following Tables to configure the Access Point. The Access Point CLI is under development as this document
is being prepared; therefore, some table cells are blank where a feature has not yet been implemented or information
needs validation. Columns used on the tables include:
— Name - Parameter, Group, or Table Name
— Type - Data type
— Values - Value range, and default value, if any
— ACC. - Indicates access type. R = Read Only (show), RW = Read-Write, can be "set", W = Write Only
— CLI Parameter - Parameter name as used in the Access Point
Access Point network objects are associated with Groups. The network objects are listed below and associated
parameters are described in the following Parameter Tables:
• System Parameters - Access Point system information
• Miscellaneous System Parameters
• Inventory Management Information
• Network Parameters - IP, DHCP, DNS and VLAN configuration
• DHCP Server Parameters
• DNS Parameters
• VLAN Parameters
• Interface Parameters - Wireless and Ethernet configuration
• Wireless 802.11b Parameters (including WDS)
• Wireless 802.11a Parameters
• Ethernet Interface Parameters
• Management Parameters - Control access to the AP-2500’s management interfaces and set the time
• SNMP Parameters
• SNMP Table Host Table Parameters
• Telnet Parameters
• Serial Port Parameters
• HTTP (web browser) Parameters
• TFTP Server Parameters
• NTP Parameters
• Security Parameters - Access Point security settings and RADIUS configuration
• RADIUS Server Parameters
• Encryption Parameters
• VPN
• AAA Parameters - Configure Authentication, Authorization and Accounting (AAA) settings
• Basic AAA Parameters
• AAA External Authorization Parameters
• AAA Internal Authorization Parameters
• Logging Parameters - System and AAA Logging
• URL Filtering Parameters - Prevent subscribers from accessing specified Web sites
• URL Filtering IP Table
• URL Filtering DNS Table
• ICC (Information Control Console) Parameters - Configure the Information and Control Console
• ICC Button Configuration
• ICC Banner Configuration
• SMTP Parameters - Enable redirection of outgoing e-mails