Filter
Top Products
210
Using the Command Line Interface
NOTE
There is an inter-dependent relationship between the Distance between APs and the Multicast Rate. In
general, larger systems operate a lower average transmit rates.
Wireless Distribution System (WDS) Parameters
NOTE
These parameters only apply to 802.11b radios.
Medium Distribution Integer enable (default)
disable
RW meddendistrib
MAC Address PhyAddress 12 hex digits R macaddr
Supported Data Rates Octet String Reported in 500 Kb/sec
intervals:
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
R suppdatarates
Transmit Rate Integer32 Reported in 500 Kb/sec
intervals:
0 (auto fallback)
2 (1 Mbit/sec)
4 (2 Mbit/sec) (default)
11 (5.5 Mbit/sec)
22 (11 Mbit/sec)
RW txrate
Supported Frequency Channels Octet String Depends on Regulatory
Domain
R suppchannels
Physical Layer Type Integer dsss (direct sequence
spread spectrum) for
802.11b
R phytype
Regulatory Domain List DisplayString USA (FCC)
Canada (DOC)
Europe (ETSI)
Spain (SP)
France (FR)
Japan (MKK)
R regdomain
Distance between APs Multicast Rate
Large 1 and 2 Mbits/sec
Medium 1, 2, and 5.5 Mbits/sec
Small 1, 2, 5.5 and 11 Mbits/sec
Minicell 1, 2, 5.5 and 11 Mbits/sec
Microcell 1, 2, 5.5 and 11 Mbits/sec
Name Type Values Access CLI Parameter
WDS Table Table N/A R wdstbl
Port Index Integer 3.1 - 3.6 (Wireless A)
4.1 - 4.6 (Wireless B)
R portindex
Status Integer enable (1)
disable (2) (default)
RW status
Partner MAC Address PhysAddress User Defined RW partnermacaddr
Name Type Values Access CLI Parameter