Q-Logic SANBOX2-16 Switch User Manual


 
B – Command Line Interface
History Command
59021-07 A B-19
D
History Command
Displays a numbered list of the previously entered commands from which you can
re-execute selected commands.
Authority None
Syntax history
Notes Use the History command to provide context for the ! command:
Enter ![command] to re-enter the most recent execution of that command.
Enter ![line number] to re-execute the corresponding command from the
History display
Enter ![partial command string] to re-execute a command that matches the
command string.
Enter !! to re-execute the most recent command.
Examples The following is an example of the History command:
SANbox2 #> history
1 show switch
2 date
3 help set
4 history
SANbox2 #> !3
help set
set SET_OPTIONS
There are many attributes that can be set.
Type help with one of the following to get more information:
set alarm
set beacon
set blade
set config blade
set config port
set config ports
set config switch
set config threshold
set config zoning
set log
set pagebreak
set port
set setup snmp
set setup system
set switch