Filter
Top Products
B – Command Line Interface
Set Config Command
B-40 59021-07 A
D
DeviceScanEnabled Enables (True) or disables (False) the
scanning of the connected device for
FC-4 descriptor information during
login. The default is True.
ForceOfflineRSCN Enables (False) or disables (True) the
immediate transmission of RSCN
messages when communication
between a port and its device is
interrupted. If enabled, the RSCN
message is queued for 200 ms. The
default is False. This parameter is
ignored if IOStreamGuard is enabled.
ARB_FF Send ARB_FF (True) instead of IDLEs
(False) on the loop. The default is
False.
InteropCredit Interoperability credit. The number of
buffer-to-buffer credits per port. 0
means the default (12) is unchanged.
ExtCredit Extended credits. The number of port
buffer credits that this port can acquire
from donor ports. The default is 0.
FANEnable Fabric address notification. Enables
(True) or disables (False) the
communication of the FL_Port address,
port name, and node name to the
logged-in NL_Port. The default is True.
LCFEnable Link control frame preference routing.
Enables (True) or disables (False)
preferred routing of frames with R_CTL
= 1100 (Class 2 responses). The default
is False. Enabling LCFEnable will
disable MFSEnable.
MFSEnable Multi-Frame Sequence bundling.
Prevents (True) or allows (False) the
interleaving of frames in a sequence.
The default is True. Enabling
MFSEnable disables LCFEnable and
VIEnable.
Table B-12. Set Config Port Parameters (Continued)
Parameter Description