Filter
Top Products
B – Command Line Interface
Show Command
B-60 59021-07 A
D
domains
Displays list of each domain and its worldwide name in the fabric.
donor
Displays list of current donor configuration for all ports.
fabric
Displays list of each domain, symbolic name, worldwide name, node IP address,
and port IP address.
fdmi [node_wwn]
Displays information (worldwide name, manufacturer, model, and number of
ports) for the device host bus adapter given by [node_wwn]. If you omit
[node_wwn], the command displays host bus adapter information for all attached
devices.
interface
Displays the status of the active network interfaces.
log [option]
Displays log entries. Refer to the ”Show Log Command” on page B-75.
lsdb
Displays Link State database information.
mem [count]
Displays information about memory activity for the number of seconds given by
[count]. If you omit [count], the value 1 is used. Displayed memory values are in
1K block units.
ns [option]
Displays name server information for the specified [option]. If you omit [option],
name server information for the local domain ID is displayed. [option] can have the
following values:
all
Displays name server information for all switches and ports.
[domain_id]
Displays name server information for the switch given by [domain_id].
[domain_id] is a switch domain ID.
[port_id]
Displays name server information for the port given by [port_id]. [port_id] is a
port Fibre Channel address.
Note: This keyword will display memory activity updates until [count] is
reached – it cannot be interrupted. Therefore, avoid using large values
for [count].