Q-Logic SANBOX2-16 Switch User Manual


 
B – Command Line Interface
Passwd Command
59021-07 A B-23
D
Passwd Command
Changes a user account’s password.
Authority Admin account name and an admin session to change another account’s
password; You can change you own password without an Admin session.
Syntax passwd [account_name]
Keywords [account_name]
The user account name. To change the password for an account name other than
your own, you must open an admin session with the account name Admin. If you
omit [account_name], you will be prompted to change the password for the
current account name.
Examples The following is an example of the Passwd command:
SANbox2 (admin) #> passwd user2
Press 'q' and the ENTER key to abort this command.
account OLD password :
account NEW password (4-20 chars) :
please confirm account NEW password:
password has been changed.