Filter
Top Products
ASMi-450 Control from the Control Port
4-10 ASMi-450 Installation and Operation Manual
CLR TST---------------------------------------------------------------------------------------
Pur
p
ose
Deactivate all the user-initiated tests and loopbacks.
Format
CLR TST
Use
1. To deactivate all the user-initiated tests and loopbacks, type:
CLR TST<CR>
2. You will see the time and date, followed by the ASMi-450 prompt.
3. If no test or loopback is now activated, you will receive ERROR 2.
DATE -------------------------------------------------------------------------------------------
Pur
p
ose
Set the date for the ASMi-450 internal real-time clock.
Format
DATE
Use
1. Type
DATE<CR>
2. The ASMi-450 sends the date entry form:
DAY = 06
MONTH = 09
YEAR = 1995
3. Bring the cursor to the first field to be changed by pressing <CR>.
4. To change the selected field, press F to increase and B to decrease the displayed
values. When done, press <CR> to move to the next field.
5. To end, press <CR> after the YEAR field. The ASMi-450 will display the TIME and
DATE fields (note that DATE has changed), followed by the ASMi-450 prompt.
DEF AGENT ----------------------------------------------------------------------------------
Pur
p
ose
Display and modify the current SNMP agent parameters. Refer to Appendix B for
additional explanations.
To enable SNMP and Telnet management, it is necessary to define all the parameters.
Format
DEF AGENT
Use
1. To define the SNMP agent parameters, type:
DEF AGENT<CR>
2. You will see the entry line for the first parameter, TELNET_APATHY_TIME.
3. After selecting the desired value, press <CR> to display the second line. If you do
not want to change the current value of a parameter, press <CR> to confirm it and
continue to the next line, otherwise type in the new value and then press <CR>.
Repeat the procedure until all the parameters are defined, and then press <CR> to end.