Filter
Top Products
ASMi-450 Control from the Control Port
ASMi-450 Installation and Operation Manual 4-19
Table 4-2. Control Terminal Alarm Messages (Cont’d)
Alarm No. Alarm Syntax Meaning State Time
30 REM LAN NOT
CONNECTED
No data is received from the remote user's
port (for ASMi-450 version with serial
data port)
or
The Ethernet interface of the remote
ASMi-450 is not connected to an
operating LAN (at least one station must
be active on the LAN)
[ON] [OFF] hh:mm:ss
DSP HDR TST -------------------------------------------------------------------------------
Purpose
Display the results of the last hardware test (made during power-on self-test and during
regular operation).
Format
DSP HDR TST
Use
1. To display the hardware test report, type:
DSP HDR TST<CR>
Display
Format
The display has one field that shows NO ERROR if everything checks good, or lists the
detected problem:
•
EPROM FAILURE
•
I/O EXPANDER ERROR
DSP ST LINE---------------------------------------------------------------------------------
Purpose
Display status information on the HDSL line of the local ASMi-450.
Format
DSP ST LINE [Option]
Use
1. To display the current status information, type:
DSP ST LINE<CR>
2. To monitor continuously the status information, type:
DSP ST LINE /R<CR>
The display will be automatically updated. To stop the monitoring, press BREAK (or
CTRL+C).