Filter
Top Products
10 Preparation
ˆ
Preparation
You can power your scanner from any of three sources:
• internal batteries (not supplied)
• standard AC power (using an optional AC adapter)
• vehicle battery power (using an optional DC
adapter)
USING INTERNAL BATTERIES
You can power your scanner using four alkaline, lithium,
or rechargeable (Ni-Cd or Ni-MH) AA batteries (not sup-
plied). For the best performance and longest life, we rec-
ommend RadioShack batteries.
Using Non-Rechargeable Batteries
Follow these steps to install non-rechargeable batteries.
1. Turn
VOLUME/OFF
counterclockwise until it clicks to
make sure the power is turned off.
2. Slide up and hold the tab on the back of the scan-
ner, then pull up the battery compartment cover
from the top edge.
20-524A.fm Page 10 Tuesday, June 27, 2000 3:41 PM