Radio Shack PRO-94 Scanner User Manual


 
28 Operation
vice bank, repeatedly press
SVC
. A bar appears above
the selected bank.
When the scanner stops on a transmission, quickly
press either:
HOLD
to stop searching and listen to the transmis-
sion.
HOLD
appears.
MON/CLR
to store the displayed frequency into the
current monitor memory.
To release the hold and continue searching, press
HOLD
(A/B)
or hold down
8
88
8
or
9
99
9
for at least 1 second. Or, if
you did not press
HOLD (A/B)
, simply press
8
88
8
or
9
99
9
to
continue searching.
Note:
Because there are many different frequencies al-
located to fire and police departments, it can take sever-
al minutes to search all the service frequencies.
Search Skip Memory
You can skip up to 50 specified frequencies during a limit
or direct search and up to 20 specified frequencies dur-
ing a service bank search. This lets you avoid unwanted
frequencies or those already stored in a channel.
Note:
You cannot skip frequencies during WX service
search.
To skip a frequency, press
S/S (L-OUT)
when the scanner
stops on the frequency during a limit, direct, or service
search. The scanner stores the frequency in memory
and automatically resumes the search.
To clear a single frequency from skip memory so the
scanner stops on it during a limit, direct, or service bank
search:
1. Press
HOLD
to stop the search.
2. Press
8
88
8
or
9
99
9
to select the frequency.
L/O
appears.
3. Press
S/S
.
L/O
disappears.
20-524A.fm Page 28 Tuesday, June 27, 2000 3:41 PM