Filter
Top Products
29
Operation
To clear all the skip frequencies at once while searching,
press
HOLD
, then hold down
S/S
until the scanner beeps
twice.
Notes:
• If you selected all frequencies to be skipped within
the search range, the scanner beeps 3 times and
does not search.
• If you select more than 50 frequencies to skip, each
new frequency replaces a frequency previously
stored, beginning with the first stored frequency.
•Press
8
88
8
or
9
99
9
to select a skipped frequency while
HOLD
appears.
L/O
appears when you select a
skipped frequency.
LISTENING TO THE MONITOR
MEMORIES
Note:
To listen to the monitor memories, the priority
channel feature must be turned off (see “Priority” on
Page 32).
To listen to the frequency stored in any one of the ten
monitor memories, press
MAN
,
MON/CLR (•)
, then the
number of the desired monitor memory (0
–
9), or repeat-
edly press
MON/CLR (•)
to step through the monitor mem-
ories.
MOVING A FREQUENCY FROM A
MONITOR MEMORY TO A CHANNEL
1. Press
MAN
.
MAN
appears.
2. Enter the number of the desired target channel
where you want to move the frequency that is stored
in the monitor memory, then press
PROG
.
PGM
appears.
3. Press
MON/CLR (•)
then enter the number (0–9) of
the monitor memory containing the frequency.
4. Press
E
. The frequency transfers from the monitor
memory into the selected channel.
20-524A.fm Page 29 Tuesday, June 27, 2000 3:41 PM