Filter
Top Products
33
Special Features
2. Enter the channel number you want to select as the
priority channel, then press
PRIORITY (H/S)
.
appears to the right of the selected channel number.
3. Repeat Steps 1 and 2 for the channel in each bank
you want to program as a priority channel.
To review all priority channels (in ascending order only),
press
PROG
, then repeatedly press
PRIORITY
to see the
numbers of the priority channels.
To turn on the priority feature, press
PRIORITY
during
scanning.
PRI
appears. Then the scanner checks the
designated priority channel every 2 seconds in each
bank. The bank number appears at the top of the dis-
play.
To turn off the priority feature, press
PRIORITY
.
PRI
dis-
appears.
Notes:
• The priority feature must be turned off to listen to the
monitor memories or to use the data skip feature.
• If you have locked out all priority channels,
appears when you activate the priority
feature. To unlock any desired priority channels, see
“Locking Out Channels” on Page 32.
USING THE KEYLOCK
To protect the scanner from accidental program chang-
es, turn on the keylock feature. When the scanner is
locked, the only controls that operate are
SCAN
,
MAN
,
KEYLOCK
,
VOLUME/OFF
, and
SQUELCH
.
To turn on the keylock, hold down
KEYLOCK
until
K/L
appears. To turn it off, hold down
KEYLOCK
until
K/L
disappears.
Note:
Using keylock does not prevent the scanner from
scanning channels.
P
LOC
OUt
20-524A.fm Page 33 Tuesday, June 27, 2000 3:41 PM